That haze between your window panes is not dirt on the glass, and it will not clear on its own. In most cases it means the seal inside a double pane window has failed and moisture has entered the space between the panes. The question is whether the window needs defogging or a full glass replacement, and that depends on the condition of the window, not on a standard price list.
Atlantic Window Repair assesses each foggy window on site and recommends the option that actually solves the problem. If defogging will restore clarity and extend the window's life, we do that. If the seal failure is too advanced or the glass has degraded, we replace the sealed glass unit and save the frame. We do not push replacements when a repair will do the job.
Serving Boca Raton, Delray Beach, Boynton Beach, Pompano Beach, Deerfield Beach, and surrounding South Florida communities.
Not every cloudy window has a failed seal. Three different things look similar from across the room, and only one of them is a repair.
The test takes ten seconds. If a cloth clears it, you do not need us.

Double pane and triple pane windows are sealed units. The space between the panes is filled with dry air or an inert gas, usually argon, and sealed shut at the factory. That seal is what gives the window its insulating value and keeps the glass clear.
In South Florida, seals fail faster than in most of the country. Intense heat, ultraviolet light, high humidity, and daily thermal cycling as the glass expands and contracts between morning and afternoon all put steady mechanical stress on the seal. Salt air along the coast speeds the process up further.
Once the seal fails:
The result is a window that looks permanently fogged from the inside, and no amount of cleaning the exterior will fix it.
Skylights use sealed glass units too, and a fogged or leaking one is handled through skylight repair and installation.
There are two ways to address a foggy window. Which one is right depends on what we find when we inspect the unit.
Defogging means drilling small, inconspicuous holes through the outer pane, cleaning the interior surfaces of the glass, injecting a drying compound along the spacer bar, and fitting vents that let the unit equalize pressure over time. The holes are sealed and nearly invisible once the work is done.
Defogging is the right call when:
It costs less than replacing the glass and restores acceptable clarity in many cases.
When defogging will not hold, the sealed glass unit comes out and a new one goes in. The frame, the sash, and the hardware all stay where they are.
We make that call on site, after looking at the window, not over the phone. If that is where your window lands, double pane and insulated glass replacement covers how the new unit is matched and fitted. The same applies to patio doors, where the glass in sliding glass doors is swapped inside the existing panel, and to impact units, which go through hurricane impact glass replacement.
When the foggy unit sits in a front or French door rather than a window, the swap runs through door glass replacement.


Most window seal manufacturers design for a temperate climate. South Florida's conditions are a different category. Homes in Boca Raton, Delray Beach, and Boynton Beach face UV index levels and temperature swings that accelerate seal degradation well ahead of the rated lifespan.
Homes within a few miles of the coast, including much of eastern Boca Raton and Highland Beach, face additional salt air exposure that corrodes both the seal material and the spacer bar. This is why foggy windows are so common in South Florida, and why addressing them promptly matters: a failed seal that is left untreated allows moisture to reach the window frame, the sill, and potentially the surrounding wall structure over time.
Replacing or repairing a failed seal early is always less expensive than dealing with the secondary damage it can cause.

We recommend repair only when it will produce a lasting result
Defogging and new sealed glass, no upselling
Our own licensed technicians on every job, no subcontractors
Frame or sill damage addressed in the same visit
Serving Boca Raton and South Florida communities
On-site assessment with no obligation
Skip the form and pick a time that works for you. A licensed technician will come to your property for a free in-home estimate. Booking takes about a minute.
Price follows three things: the size of the glass, the type of unit (standard, Low-E, tempered, or impact), and whether the window can be defogged or needs a new sealed unit. Defogging costs the least, a new insulated unit costs more, and impact units sit at the top. We quote each window after measuring it on site, and the estimate is free.
Yes, they can, in many cases. Defogging cleans the interior surfaces and adds a drying compound, which restores acceptable clarity when the glass is undamaged and the fogging is not too far along. We assess each window individually and recommend it when it will genuinely solve the problem.
No, it cannot. The haze sits inside a cavity that was sealed shut at the factory, so there is no way to reach those two surfaces without taking the unit apart. Washing the faces you can reach changes nothing at all.
Rarely, and not for long. The kits drill a vent hole and let the trapped moisture out, which clears the haze for a while. What is in the box does not restore the seal or replace the drying material that has already soaked through, so in Florida humidity the fog usually comes back within a season.
Ten to twenty years is the usual range, and South Florida sun and humidity tend to pull that toward the lower end. A seal that fails in the first few years usually points to a manufacturing or installation problem rather than normal aging.
Sometimes it does. Defogging clears the existing moisture and slows further degradation, but it does not restore the original factory seal. That is why we recommend it only when we believe it will hold. If the seal failure is too far along, we say so upfront and recommend replacement instead.
Almost never. Fogging is a failure of the sealed glass unit, not the frame. In the vast majority of cases the frame is in good condition and only the glass needs attention, either through defogging or a new sealed unit. Full window replacement is only needed when the frame itself is corroded, warped, or structurally damaged.
Often, if the window is still inside its glass seal coverage period. Many manufacturers cover seal failure for a set number of years, so check your paperwork or the label etched on the glass or spacer before paying for a repair out of pocket.
No, it usually doesn't. Most policies treat a failed seal as wear and aging rather than sudden damage. When the same unit is cracked by a storm or flying debris, that damage is more often covered, so it is worth checking your policy or asking your agent.
Not in any lasting way. Argon can be injected through a drilled hole, but once the edge seal has failed the gas leaks back out, so a refill does not bring the insulation back for long. A new sealed unit is the only way to get the original gas fill back.
Foggy windows do not clear on their own, and the longer a failed seal goes untreated, the more it can cost to fix. Call us or send a message to schedule your free on-site estimate. We will tell you exactly what your windows need and give you a clear quote before any work begins.
Serving South Florida's tri-county region with professional foggy window repair
Boca Raton · Delray Beach · Boynton Beach · Lake Worth · Highland Beach · Parkland
Pompano Beach · Deerfield Beach · and surrounding communities
Select service areas, contact us to confirm coverage
Foggy panes come from a failed insulated glass seal, common in vinyl units from CWS and Alside and in impact units from PGT. We replace the sealed glass unit itself while keeping your existing frame, since cleaning cannot clear fog that is sealed inside the glass.